In Ground Weighbridge
Pit mounted / in Ground weighbridges are fitted flush with the road surface.
This is done by digging a trench to the required size and lining it with concrete. Load cells can then be dropped in and the main weighing deck fitted on top. Handily, many of the old lever based bridges were also built into pits. So, if you are stuck with an old bridge, it can be updated quite easily, because they don’t need mounting ramps at either end, pit mounted bridges can fit into a much smaller space than surface mounted.
On the downside, pit mounted bridges can be prone to flooding. This makes choosing the right bridge for your yard especially important as you must take drainage into account. And digging that pit in the first place could increase the cost of your civil installation.
We service all makes and models of weighbridge offering the complete service package, whether you have an Avery, Sensortronic, Philips, MettlerToldeo, Toltec, Weightronix - mechanical or electronic we have the tools and experience to service, repair and certify them all! Nationally!
On the downside, pit mounted bridges can be prone to flooding. This makes choosing the right bridge for your yard especially important as you must take drainage into account. And digging that pit in the first place could increase the cost of your civil installation.
We service all makes and models of weighbridge offering the complete service package, whether you have an Avery, Sensortronic, Philips, MettlerToldeo, Toltec, Weightronix - mechanical or electronic we have the tools and experience to service, repair and certify them all! Nationally!
Call 0800765041 for a competitive quote or
email service@scaletec.co.nz for calibration and repair
Scaletec SCS-M
Scaletec SCS-M - Chinese Designed and manufactured
Steel Road Weighbridge - (Surface or Pit installation)
8mm + 2mm Checker Plate Deck, 8 x 6mm x 250mm U-Beams
Surface Treatment – Shot blasted followed by 2 coats of primer epoxy paint and one coat alkyd enamel finish paint
Four OIML approved Zemic BM14G Stainless Steel Compression Loadcells
Stainless steel junction box
Concentrated Load Capacity of 20000kg
Span deflection Ratio of 1 : 600
Optional Steel Ramps and Side Rails available
Approved for Trade use in New Zealand MCA1975
Requires Suitable Indicator for your requirements
NOT AVAILABLE AS ONLINE PURCHASE.
Price is indicative and gst excluded.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
Steel Road Weighbridge - (Surface or Pit installation)
8mm + 2mm Checker Plate Deck, 8 x 6mm x 250mm U-Beams
Surface Treatment – Shot blasted followed by 2 coats of primer epoxy paint and one coat alkyd enamel finish paint
Four OIML approved Zemic BM14G Stainless Steel Compression Loadcells
Stainless steel junction box
Concentrated Load Capacity of 20000kg
Span deflection Ratio of 1 : 600
Optional Steel Ramps and Side Rails available
Approved for Trade use in New Zealand MCA1975
Requires Suitable Indicator for your requirements
NOT AVAILABLE AS ONLINE PURCHASE.
Price is indicative and gst excluded.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
Immediate availability
$ 28,175.00
European Designed and Manufactured
Innovative vehicle weighing dual track weighbridge, easily transportable and installable thanks to the reduced height and weight. Designed and built with vey high quality materials, this represents the most efficient solution for saving time, space, and money in comparison to the classic weighbridges currently available on the market. The standard version is fitted with CE-M 3000e APPROVAL, for legal for trade use.
TECHNICAL FEATURES
Precise and versatile platforms, suitable for all kinds of applications; ideal for modern industries, farms, work yards, landfills, ports, etc, in which one can save space or change the logistical stations.
Extremely compact: only 22 cm high. Takes up little space if installed on the street surface, reduced masonry if installed flush floor to the road surface.
The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe (version for higher loads is available upon request).
Sturdy loading surface in striated sheet steel.
Sandblasting and varnishing with bi-component epoxy coating, highly resistant to corrosion.
Installable above, as well as flush floor to the street surface.
Reinforced on and off ramps, for mobile or fixed installation (optional).
Weight detection system through oscillating load bars (patented system) with integrated brake / acceleration compensating limits and anti-slip rubber resting plates.
Load cells protected from dust and water.
Fitted with approval, carried out in factory (to be combined with Dini Argeo indicator).
Dust and waterproof wirings and connections, easy to connect and disconnect.
Modularity: by adding or removing pairs of modules, the weighbridges can have these lengths: 4,5 m - 9 m - 13,5 m - 18 m - 22,5 (up to 36m by price estimate).
Wide range of connectable weight indicators, also functioning with rechargeable battery, which allow to use the weighbridge also without an electrical power supply.
30m long connection cable between DTW and indicators.
POA
NOT AVAILABLE AS ONLINE PURCHASE.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
Innovative vehicle weighing dual track weighbridge, easily transportable and installable thanks to the reduced height and weight. Designed and built with vey high quality materials, this represents the most efficient solution for saving time, space, and money in comparison to the classic weighbridges currently available on the market. The standard version is fitted with CE-M 3000e APPROVAL, for legal for trade use.
TECHNICAL FEATURES
Precise and versatile platforms, suitable for all kinds of applications; ideal for modern industries, farms, work yards, landfills, ports, etc, in which one can save space or change the logistical stations.
Extremely compact: only 22 cm high. Takes up little space if installed on the street surface, reduced masonry if installed flush floor to the road surface.
The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe (version for higher loads is available upon request).
Sturdy loading surface in striated sheet steel.
Sandblasting and varnishing with bi-component epoxy coating, highly resistant to corrosion.
Installable above, as well as flush floor to the street surface.
Reinforced on and off ramps, for mobile or fixed installation (optional).
Weight detection system through oscillating load bars (patented system) with integrated brake / acceleration compensating limits and anti-slip rubber resting plates.
Load cells protected from dust and water.
Fitted with approval, carried out in factory (to be combined with Dini Argeo indicator).
Dust and waterproof wirings and connections, easy to connect and disconnect.
Modularity: by adding or removing pairs of modules, the weighbridges can have these lengths: 4,5 m - 9 m - 13,5 m - 18 m - 22,5 (up to 36m by price estimate).
Wide range of connectable weight indicators, also functioning with rechargeable battery, which allow to use the weighbridge also without an electrical power supply.
30m long connection cable between DTW and indicators.
POA
NOT AVAILABLE AS ONLINE PURCHASE.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
$ 0.00
THE STRONGEST WEIGHBRIDGE ON EARTH
Available for above-ground or pit installations
• Top access to load cells and junction boxes
for easy installation and maintenance
• All load cell cable is run through
factory-installed metal conduit with
flex-conduit hub fittings from load cell
to provide ultimate protection
• Dimensioned to easily fit existing foundations
Capacity of Weighbridges:
60000kg x 20kg Dual deck or other custom capacity plus custom capacity
Length of Weighbridges:
24 meters or custom length as reqyuired
NOT AVAILABLE AS ONLINE PURCHASE.
Price is indicative and gst excluded.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
Available for above-ground or pit installations
• Top access to load cells and junction boxes
for easy installation and maintenance
• All load cell cable is run through
factory-installed metal conduit with
flex-conduit hub fittings from load cell
to provide ultimate protection
• Dimensioned to easily fit existing foundations
Capacity of Weighbridges:
60000kg x 20kg Dual deck or other custom capacity plus custom capacity
Length of Weighbridges:
24 meters or custom length as reqyuired
NOT AVAILABLE AS ONLINE PURCHASE.
Price is indicative and gst excluded.
Please contact us for an updated, installed price and indicator options to suit your individual requirements
$ 109,250.00